Xtreme LP Diving Hoses | Regulator Hoses | Information & Applications
We always try to offer some useful information on our products, as well as any relevant bulletins we have that may be useful.
Miflex Hoses – Dedicated to Quality
At Miflex we are very proud of our Xtreme range of diving hoses, which have been created and developed specifically for the diving market.
We only manufacture our products from the highest quality materials and manufacture to the highest levels of quality available, in our Italian factory.
You can recognise a Miflex hose, as they are clearly marked with the Miflex name as all products should show you where they are made, as well as the suitable standards and pressure ratings, including the important EN250 marking.
We offer a full warranty on our hoses and continually review our products to assess and improve any areas as required to suit today’s changing diving market and it’s requirements.
Supplied with every hose are the official Miflex Manufacturers User Information and Warranty Guide. This contains information on General Use and Handling, Fitting and Servicing Instructions as well as Warranty Details. These are stored in the Miflex official premium packaging which doubles as a water resistant Dry Bag.
Our hoses are used as standard on equipment by many of leading diving brands.
If you want the best, ensure you are diving Miflex Xtreme.
Manufacturers Bulletin’s
As we discuss our hoses with different manufacturers, they may issue guidance and notes for changing hoses and we will include these in this section.
Regulator Hoses Fittings
Regulator hoses come with a couple of different styles of fittings, as standard, and these are as follows:
Standard 3/8” male UNF (to connect 1st stage) with a 9/16” female UNF (to connect to 2nd stage)
This is used by the majority of diving manufacturers.
The majority of our range of regulator hoses utilise this fitting combination.
½”male UNF (to connect to 1st stage) with a 9/16” female UNF (to connect to 2nd stage)
This is a style of regulator hose, used by a number of diving manufacturers for their primary supply.
Including:
Apex ATX50, ATX100 & ATX200
Mares Abyss 22 & Prestige 22,
If you are in anyway unsure on your requirements, please check with your local dive store/service centre or with your diving equipment manufacture.
Other Regulator Hose fittings
All other requirement to connect to other styles of equipment/connections are made with the use of adaptors and some of these are shown on our Adaptors & Accessories page.